MSFS Blind Assist

Hotkey Reference

Chapter 4 of 4 in Appendices of the MSFS Blind Assist user guide.

Press ] for Output mode (reading things out) or [ for Input mode (doing things), then the key. “Output Shift+H” means press ], then Shift+H. If modes are new to you, read Output Mode and Input Mode first.

This appendix is in two parts. Hotkeys on Every Aircraft lists the keys that work the same whatever you fly. Then each aircraft has a short section with only its own keys, the keys inside its own windows, and the general keys that behave differently or do nothing on it. If a key is not in an aircraft’s section, it works as described in the general part.

Inside BA, File, then Hotkey List shows the list for the aircraft you have selected, with a search box (see The Main Window).

Hotkeys on Every Aircraft

Modes and BA’s main window

These work without a mode.

Output: altitude and vertical speed

Output: speed and heading

Output: autopilot windows

These read what the FCU, MCP or flight control panel shows, with its mode. The exact wording differs by aircraft; see Autopilot Windows.

Output: navigation and distance

Output: fuel, weight and configuration

What each one includes (per tank, centre of gravity) depends on the aircraft; see Readout Hotkeys.

Output: weather

Output: time

Output: where you are

Output: traffic

Output: taxi

Output: flying aids

Output: windows and planning

Output: AI and display reading

Output: ground services and networks

Input: teleport and planning

Input: autopilot windows

Each opens a window where you type a value, with the related mode buttons. The buttons differ by aircraft; see each aircraft section and Autopilot Windows.

Input: aircraft windows

Input: taxi, GSX and SayIntentions

Keys inside shared windows

Hand Fly and Visual Guidance quick keys

While Hand Fly mode or Visual Guidance is on, these single keys work with no mode key at all.

FlyByWire A320neo

Full explanations: FlyByWire A320neo (A32NX).

Output keys

W and Shift+W include the centre of gravity. Shift+D gives top of climb when top of descent is not known yet.

Input keys

The autopilot windows: Ctrl+S has SPD/MACH, Ctrl+H the HDG-V/S / TRK-FPA toggle, Ctrl+A the 100/1000 increment, Ctrl+P AP 1, AP 2, A/THR, APPR, LOC, EXPED, the disconnects and Flight Director status, and Ctrl+B sets both sides from one value.

MCDU window (Input Shift+M)

DCDU window (Input Ctrl+Shift+D)

Other windows

General keys that differ or don’t work here

Fenix A320 CEO

Full explanations: Fenix A320 CEO.

Output keys

Each display key opens a live window read from the Fenix. When the Fenix cannot share that display, it gives the AI read instead, which needs an AI provider and Fenix v3.

Input keys

Ctrl+P opens the autopilot window: AP1, AP2, ATHR, APPR, LOC, EXPED and the disconnect buttons for each side. Input Shift+T opens the Fenix’s own EFB web page, where Alt+Home goes back to the EFB’s home screen.

MCDU window (Input Shift+M)

Fenix windows (Input Ctrl+Shift+F)

General keys that differ or don’t work here

FlyByWire A380X

Full explanations: FlyByWire A380X.

Output keys

Q and A read in metres when the FCU’s MTRS button is on.

Input keys

The Ctrl+A window adds a metric toggle, and Ctrl+P a Flight Director button.

MCDU / MFD window (Input Shift+M)

RMP window (Input Ctrl+Shift+R)

ECL window (Output Ctrl+Shift+C)

OANS / BTV window (Output Ctrl+Shift+B)

General keys that differ or don’t work here

Headwind A330-900neo

Full explanations: Headwind A330-900neo.

The keys are exactly those of the FlyByWire A320neo, including the MCDU, DCDU and flyPad windows. The only difference you will hear is Output B, which reads the simulator’s own altimeter on this aircraft.

PMDG 737

Full explanations: PMDG 737 (NG3).

Output keys

F and Shift+F read fuel tank by tank.

In the Engine displays window, Tab moves between the two lists and the controls, the arrow keys read a list, and Escape closes it. The Navigation display and Primary flight display windows work the same way, with one list.

Input keys

The Ctrl+P window is the 737 Autopilot: CMD A, CMD B, CWS A and B, both flight directors, approach, VOR LOC, A/T arm, disengage bar, disconnects and bank limit.

CDU window (Input Shift+M)

General keys that differ or don’t work here

PMDG 777

Full explanations: PMDG 777. The keys are those of the PMDG 737 except:

HorizonSim 787-9

Full explanations: HorizonSim 787-9.

Output keys

F and Shift+F read fuel tank by tank; D adds the time en route.

Input keys

The Ctrl+P window is the 787 Autopilot: A/P, A/T, LNAV, VNAV, approach, level change, altitude hold, heading hold, V/S and A/P disconnect. The Ctrl+B window takes the QNH in hectopascals, with a Standard button.

FMC window (Input Shift+M)

EICAS and synoptic windows

General keys that differ or don’t work here

iFly 737 MAX8

Full explanations: iFly 737 MAX8.

Output keys

D and Shift+D read the FMC’s PROG page; if neither CDU shows it, BA switches the first officer’s CDU to it. N includes the NAV mode flag, such as ILS.

Input keys

The Ctrl+P window has CMD A and B, CWS A and B, both flight directors, A/T arm, disengage bar, bank limit and the disconnects. Input Shift+T opens the iFly EFB tablet; F5 reloads it, and a Retry button appears if it cannot be reached.

FMC window (Input Shift+M)

General keys that differ or don’t work here

BlueBird 757-200

Full explanations: BlueBird 757-200.

Output keys

BA moves the camera for the AI reads and puts your view back afterwards. The 757 plays its own take-off speed calls, so Takeoff Assist does not call “80 knots” on it; it still calls “100 knots”.

F and Shift+F read each tank with a total, L adds the flap angle while the flaps are not at the lever’s position, Shift+G adds the lever’s position, UP, OFF or DOWN (“Gear up, lever off”), and B reads the three altimeters and the radio minimums (“Altimeter: 1018, 30.05. DH 200”). The trim is spoken in BlueBird’s units while it moves (“Trim 5.3”), and the CDU’s EXEC light when it comes on and goes out (“EXEC light on”, “EXEC light off”).

Input keys

Each MCP window, the altimeter window and the nav radios window stay open for the next value; Escape closes them. In an MCP window, Alt and a button’s underlined letter presses it: Alt+S HDG SEL, Alt+H HDG HOLD, Alt+L LNAV; Alt+I Speed Intervene, Alt+M IAS/MACH, Alt+S SPD, Alt+T THR, Alt+L FLCH; Alt+H ALT HOLD, Alt+V VNAV, Alt+L FLCH; Alt+V V/S. FLCH is Alt+L in both windows, as Level Change is on the PMDG 737. The 757 has no altitude intervene: for a step climb, set the new altitude on the MCP and enter it as the cruise altitude on the CDU’s CRZ page.

Autopilot window (Input Ctrl+P)

CDU window (Input Shift+M)

Display windows (Output Alt+P, Alt+E, Alt+S, Alt+N)

EFB window (Input Shift+T)

With the simulator closed, Shift+T opens the 757 EFB settings window instead: Tab moves through the Status box, the Section list and the section’s settings, Enter saves a box, and Escape closes.

Altimeter and minimums window (Input Ctrl+B)

General keys that differ or don’t work here

TFDi MD-11

Full explanations: TFDi MD-11.

Output keys

L includes the Dial-A-Flap angle, F and Shift+F read every tank with a total, B reads the captain’s altimeter, and Shift+G the gear lever.

Input keys

Ctrl+B sets all three altimeters from one entry. Ctrl+S and Ctrl+V work out from the number you type whether it is knots or Mach, feet per minute or an angle.

Flight Control Panel window (Input Ctrl+P)

Every button has its own Alt+letter, spoken with the button. The ones that are not the first letter:

MCDU window (Input Shift+M)

The MD-11 has no EXEC, DEL or PREV PAGE key, like the real aircraft.

General keys that differ or don’t work here